QWEEN
Your old ring says 12, the site you love says US 6. This ring size chart for India lines up every scale by the one number they share: millimetres.
A ring size chart for India works as a conversion chart, lining up every scale by inside circumference in millimetres: Indian size 12 is about 52 mm, close to US 6 and UK L½; Indian 14 is about 54 mm, close to US 6¾ and UK N. Measure a ring that already fits, or your finger at the end of the day, and choose the nearest size up if you fall between two.
The ring size chart for India works through the inside circumference in millimetres, the one measure every scale shares. Under the international standard ISO 8653, a ring size is simply that circumference in millimetres, so a 54 mm ring is size 54.[1] Indian, US and UK sizes are older labels for the same measurement.
The chart below lines them up. US sizes come from the standard US scale, and UK sizes from the letter scale.[2] The Indian figures are approximate: Indian sizes follow no single fixed formula, and the millimetres for each size vary from one jeweller to the next.
| Indian size | Circumference | Diameter | US size | UK size |
|---|---|---|---|---|
| 6 | 46 mm | 14.6 mm | 3¾ | G½ |
| 8 | 48 mm | 15.3 mm | 4½ | I |
| 9 | 49 mm | 15.6 mm | 5 | J½ |
| 10 | 50 mm | 15.9 mm | 5¼ | K |
| 11 | 51 mm | 16.2 mm | 5¾ | L |
| 12 | 52 mm | 16.6 mm | 6 | L½ |
| 13 | 53 mm | 16.9 mm | 6½ | M½ |
| 14 | 54 mm | 17.2 mm | 6¾ | N |
| 15 | 55 mm | 17.5 mm | 7¼ | O |
| 16 | 56 mm | 17.8 mm | 7½ | O½ |
| 17 | 57 mm | 18.1 mm | 8 | P½ |
| 18 | 58 mm | 18.5 mm | 8½ | Q¼ |
| 19 | 59 mm | 18.8 mm | 8¾ | R |
| 20 | 60 mm | 19.1 mm | 9¼ | S |
| 22 | 62 mm | 19.7 mm | 10 | T½ |
Indian charts can differ by half a size from one to the next, because no single official Indian scale is in everyday use. The millimetre column is the one to trust: if you know your circumference, you can find your size on any chart.
When you shop, ask for the size in the scale the jeweller uses, and check it against the millimetre figure.
To convert an Indian ring size to US, find the circumference for your Indian size, then find the US size closest to it. Indian 9 is close to US 5, Indian 12 to US 6, Indian 14 to US 6¾, Indian 17 to US 8, and Indian 20 to about US 9¼.
The two scales move at different speeds. Each Indian size adds roughly 1 mm of circumference, while each US size adds about 2.5 mm.[2] One US size therefore covers about two and a half Indian sizes, which is why an Indian size often lands on a US quarter or half size.
Going the other way, from US to Indian, works the same. A US 7 is about 54.4 mm, which sits between Indian 14 and 15; most people choose 15 for comfort, or 14 for a ring that should not slip, such as one worn with a band.
A common case: a ring bought abroad is marked US 6, and the new one is listed in Indian sizes. US 6 is about 51.9 mm, so Indian 12 is the match.
UK ring sizes use letters, from A upwards, with half sizes in between, and each full letter adds about 1.25 mm of circumference.[2] To convert, find the circumference for the UK letter, then read across to the US or Indian size.
Letters leave no easy sum to do in your head, so use the chart: US 5 is close to UK J½, US 6 to UK L½, US 7 to UK N½ and US 8 to UK P½. UK and Australian sizes use the same letter scale, so a chart for one works for the other.
UK letters fall roughly every Indian size and a quarter, so an Indian size and a UK letter line up neatly more often than Indian and US do.
The most reliable way to find your ring size at home is to measure a ring that already fits the same finger. The second is to measure the finger itself with a strip of paper or thread, at the end of the day, when fingers are at their fullest.
To measure a ring you already own, lay it on a ruler and read the inside diameter, edge to edge, in millimetres. Match that to the diameter column. Measure across the widest point, and choose a ring that is round, not bent.
Thread is easy to pull too tight, and paper that is too wide reads larger than the finger is. A jeweller's finger gauge set, a ring for each size made to the same measures as the ring stick used in workshops, is more accurate than either.[3]
Ring sizes go wrong most often because of timing, band width and knuckles, not arithmetic. Fingers are smaller in the morning and in the cold, and larger in the evening, in the heat and after salty food or exercise.
Band width matters more than most people expect. A wide band covers more of the finger and feels tighter, so a wide band often needs half a size larger than a slim one. A large stone on top makes a ring top-heavy, and a slightly snug fit stops it turning.
Knuckles are the other trap. If your knuckle is much wider than the base of your finger, a ring that passes the knuckle may spin below it; choose the size that passes the knuckle, and wear it a day before deciding.
Many rings can be resized by a size or so, but not every design. Plain bands and rings with stones only on the top can usually be made a little larger or smaller. Rings with stones all the way round, such as full eternity bands, usually cannot be resized at all.
Half-eternity bands, with stones across the top, can sometimes be adjusted at the plain lower half. Pavé and snow-set designs, where stones cover the surface, leave less metal to work with, so the room for change is smaller.
At QWEEN, resizing is available at any QWEEN boutique, up to one size up or down, subject to the design. QWEEN's services are available for life but are not free.
To get the size right on a ring you buy online or as a surprise, measure a ring she already wears on that finger, and buy where an exchange for size is allowed. Borrow a ring she wears on the same finger and the same hand, trace its inside, or press it into soap to keep the outline.
Rings for the right and left hand can differ by half a size, because the dominant hand is often slightly larger. Measure the ring from the hand she will wear the new one on.
For an engagement ring, where the surprise matters, choose a design that can be resized and keep the box and invoice, so a size change after the proposal is simple. Our guide to engagement ring styles covers which designs suit everyday wear.
QWEEN believes the surest way to know a ring fits is to try it on, without pressure, on your own hand. A chart gets you close; wearing the ring tells you the rest, because width, weight and stone height all change how a size feels.
What QWEEN does differently is put the rings in your hands. QWEEN stores are large open-display spaces, organised in zones rather than counters, where you can walk in without an appointment and try rings on yourself. Every QWEEN diamond is natural and certified, and the certificate comes with the ring, along with its invoice, in a QWEEN jewellery box.
QWEEN's services continue after the day you buy. Cleaning and polishing, repairs and resizing are available at any QWEEN boutique, including for rings bought online, so a ring whose fit changes over the years has somewhere to go.
What you get if the size is wrong:
| QWEEN promise | Terms |
|---|---|
| QWEEN 30-day exchange | Ring size one up or down, within 30 days, unused, with invoice, certificate and box |
| QWEEN resizing | Up to one size up or down at any QWEEN boutique, subject to design; paid service |
| QWEEN lifetime exchange and buyback | Valued at QWEEN's prevailing rates (making charges and taxes are not returned) |
To see it for yourself, visit a QWEEN store and try two sizes of the same ring side by side, or ask a stylist on a video consult.
Different ring designs fit differently at the same size, so these rings show the range from slim bands to fuller tops.
The Ever Bright Ring is a band of nine calibrated diamonds in Champagne Fizz gold, and The Forever Chapter Ring is a half-eternity band in Rose Bloom gold with each diamond in its own four-prong setting. The Edge of Glory Ring raises a half-carat solitaire in 18K white gold, the kind of top-heavy ring that suits a snug fit.
14K · Desert Noon
Flutter Ring
View piece14K · Champagne Fizz
Ever Bright Ring
View piece14K · Desert Noon
Collecting Memories Ring
View piece14K · Rose Bloom
The Forever Chapter Ring
View piece14K · Rose Bloom
Infinity Frame Ring
View piece18K · Snowfall White
Edge of Glory Ring
View piece14K · Snowfall White
Star Struck Trail Ring
View pieceTry two sizes side by side
A ring that measures right can still feel wrong on the hand. Trying two sizes takes a minute in store.
Either works, as long as you read the matching column. Circumference is what the ISO standard uses and is easier to measure on a finger; diameter is easier to measure on a ring you already own.
Indian 14 is about 54 mm in inside circumference, which is close to US 6¾ and UK N. If you prefer an easier fit, US 7 is the nearest whole size.
US 7 is about 54.4 mm in circumference, which falls between Indian 14 and 15. Choose 15 for comfort or 14 for a ring that should not slip.
Wrap a thin paper strip around the base of the finger, mark the overlap and measure it flat in millimetres. That is your circumference. Or measure the inside diameter of a ring that fits.
Usually, yes. A wide band covers more of the finger and feels tighter, so many people need about half a size larger than they wear in a slim band.
Not always. The dominant hand is often slightly larger, sometimes by half a size. Measure the finger on the hand you will wear the ring on.
No. Plain bands and rings with stones only on top can usually be resized a little. Full eternity bands, with stones all the way round, usually cannot be resized.
Share this article