A bangle has to slide over the widest part of your hand, so you measure your hand, not your wrist. Follow the steps below and match your measurement to the bangle size chart.
STEP 01
Close your fingers together and bring your thumb to your little finger (as shown in the image). This is the same position your hand will be in when putting on or taking off a bangle.
STEP 02
Wrap a measuring tape or strip of paper around the widest part of your hand at the knuckles. Keep it snug but comfortable. Use a pen to mark the overlapping parts of the string or paper.
STEP 03
Lay the string/paper flat against a ruler and measure between the two points you have marked. This is your hand circumference in centimeters.
STEP 04
Use the size chart below to match your hand circumference measurement. For the best fit, choose the bangle size that is equal to or slightly larger than your measurement.
STEP 01
Lay your bangle flat and measure straight across the inside opening from one inner edge to the other (as shown in the image).
STEP 02
Match your inner diameter measurement (in mm) to the corresponding size in the chart.
| Size | Inner Diameter (mm) | Circumference (cm) |
|---|---|---|
| 2-0 | 50.8 | 159.59 |
| 2-1 | 52.4 | 164.62 |
| 2-2 | 54 | 169.65 |
| 2-3 | 55.6 | 174.67 |
| 2-4 | 57.2 | 179.7 |
| 2-5 | 58.7 | 184.41 |
| 2-6 | 60.3 | 189.44 |
| 2-7 | 61.9 | 194.46 |
| 2-8 | 63.5 | 199.49 |
| 2-9 | 65.1 | 204.52 |
| 2-10 | 66.7 | 209.54 |
| 2-11 | 68.3 | 214.57 |
| 2-12 | 69.9 | 219.6 |
| 2-13 | 71.5 | 224.62 |
| 2-14 | 73.1 | 229.65 |
| 2-15 | 74.7 | 234.68 |
| 3-0 | 76.3 | 239.7 |
Found your size?
Shop bangles